unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

Selenium - Developers mailing list
Hi. I'm trying to follow the instructions at https://github.com/SeleniumHQ/selenium/blob/master/CONTRIBUTING.md

Step 1 fails with

git clone [hidden email]:mcharsley/selenium.git
Cloning into 'selenium'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

(I get the same if I don't replace "username" with "mcharsley"

but git clone https://github.com/SeleniumHQ/selenium worked OK. So I went ahead with that

I'm now up to step 7. And that's failing with

git push origin NetworkConnectionFix
Username for 'https://github.com': mcharsley
Password for 'https://[hidden email]': 
remote: Permission to SeleniumHQ/selenium.git denied to mcharsley.
fatal: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

My account's 2-factor enabled, but I've set up a Personal Access Token with all the "Repo" scopes. Entering garbage rather than a PAT gives a different "Invalid username or password" error, so it's a Authz not an Authn error.

I'm a inexperienced with git, much less github, so it could easily be my being an idiot, but having said that
 - are the instructions up-to-date?
 - is the problem due to my cloning the wrong way?
 - is there some step I missed?
 - do I need to be permissioned somewhere (I'm not asking for a commit bit. Just the ability to upload a patch for review)
 - should I just give up and mail a patch file somewhere?

thanks

Mark

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/f653b425-66b2-470e-b1fe-5cebc357601e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

Paul Hammant-3
Can you pair with someone who's github savvy?

Sent from my iPhone

On Nov 16, 2016, at 10:36 AM, 'Mark Charsley' via Selenium Developers <[hidden email]> wrote:

Hi. I'm trying to follow the instructions at https://github.com/SeleniumHQ/selenium/blob/master/CONTRIBUTING.md

Step 1 fails with

git clone [hidden email]:mcharsley/selenium.git
Cloning into 'selenium'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

(I get the same if I don't replace "username" with "mcharsley"

but git clone https://github.com/SeleniumHQ/selenium worked OK. So I went ahead with that

I'm now up to step 7. And that's failing with

git push origin NetworkConnectionFix
Username for 'https://github.com': mcharsley
Password for 'https://mcharsley@...': 
remote: Permission to SeleniumHQ/selenium.git denied to mcharsley.
fatal: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

My account's 2-factor enabled, but I've set up a Personal Access Token with all the "Repo" scopes. Entering garbage rather than a PAT gives a different "Invalid username or password" error, so it's a Authz not an Authn error.

I'm a inexperienced with git, much less github, so it could easily be my being an idiot, but having said that
 - are the instructions up-to-date?
 - is the problem due to my cloning the wrong way?
 - is there some step I missed?
 - do I need to be permissioned somewhere (I'm not asking for a commit bit. Just the ability to upload a patch for review)
 - should I just give up and mail a patch file somewhere?

thanks

Mark

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/f653b425-66b2-470e-b1fe-5cebc357601e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/07F06EF6-B4BD-4EEB-A82F-1050654B2664%40hammant.org.
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

Daniel Wagner-Hall
In reply to this post by Selenium - Developers mailing list
It sounds like you don't have an SSH private key set up... https://help.github.com/articles/error-permission-denied-publickey/ has details, but basically you need the following:

1) Go to https://github.com/settings/keys and make sure you have a key set up - there are instructions there for how to generate one if not.
2) Edit ~/.ssh/config to have an entry which looks something like:

    HostName github.com
    IdentityFile /path/to/your/private/key
    User mcharsley

On 16 November 2016 at 15:36, 'Mark Charsley' via Selenium Developers <[hidden email]> wrote:
Hi. I'm trying to follow the instructions at https://github.com/SeleniumHQ/selenium/blob/master/CONTRIBUTING.md

Step 1 fails with

git clone [hidden email]:mcharsley/selenium.git
Cloning into 'selenium'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

(I get the same if I don't replace "username" with "mcharsley"

but git clone https://github.com/SeleniumHQ/selenium worked OK. So I went ahead with that

I'm now up to step 7. And that's failing with

git push origin NetworkConnectionFix
Username for 'https://github.com': mcharsley
Password for 'https://mcharsley@...'
remote: Permission to SeleniumHQ/selenium.git denied to mcharsley.
fatal: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

My account's 2-factor enabled, but I've set up a Personal Access Token with all the "Repo" scopes. Entering garbage rather than a PAT gives a different "Invalid username or password" error, so it's a Authz not an Authn error.

I'm a inexperienced with git, much less github, so it could easily be my being an idiot, but having said that
 - are the instructions up-to-date?
 - is the problem due to my cloning the wrong way?
 - is there some step I missed?
 - do I need to be permissioned somewhere (I'm not asking for a commit bit. Just the ability to upload a patch for review)
 - should I just give up and mail a patch file somewhere?

thanks

Mark

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/f653b425-66b2-470e-b1fe-5cebc357601e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/CA%2Bc80B%2BGNp2KOnNUe_YiRNfCrTHAQuS2dosGo0XrpAOxZhX%2B%3DA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: unable to access 'https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

Selenium - Developers mailing list
In reply to this post by Selenium - Developers mailing list
Bah found the problem. I fell over at the first hurdle, and never forked the project (which explains why my git clone failed in step 1). So my origin is the master branch, which obviously I don't have permissions to push into.

All sorted now

Mark

On Wednesday, November 16, 2016 at 3:36:46 PM UTC, Mark Charsley wrote:
Hi. I'm trying to follow the instructions at <a href="https://github.com/SeleniumHQ/selenium/blob/master/CONTRIBUTING.md" target="_blank" rel="nofollow" onmousedown="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium%2Fblob%2Fmaster%2FCONTRIBUTING.md\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNGH-gl6y4S8MebTaa0eP8mHbu9XcA&#39;;return true;" onclick="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium%2Fblob%2Fmaster%2FCONTRIBUTING.md\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNGH-gl6y4S8MebTaa0eP8mHbu9XcA&#39;;return true;">https://github.com/SeleniumHQ/selenium/blob/master/CONTRIBUTING.md

Step 1 fails with

git clone [hidden email]:mcharsley/selenium.git
Cloning into 'selenium'...
Warning: Permanently added the RSA host key for IP address '192.30.253.112' to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

(I get the same if I don't replace "username" with "mcharsley"

but git clone <a href="https://github.com/SeleniumHQ/selenium" target="_blank" rel="nofollow" onmousedown="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNHkKde0Tk6bIXBUV5x9uzBcOzKBbQ&#39;;return true;" onclick="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNHkKde0Tk6bIXBUV5x9uzBcOzKBbQ&#39;;return true;">https://github.com/SeleniumHQ/selenium worked OK. So I went ahead with that

I'm now up to step 7. And that's failing with

git push origin NetworkConnectionFix
Username for '<a href="https://github.com" target="_blank" rel="nofollow" onmousedown="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNF1bAGfmQoHq8_-mOCQJCIlNtGM3Q&#39;;return true;" onclick="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNF1bAGfmQoHq8_-mOCQJCIlNtGM3Q&#39;;return true;">https://github.com': mcharsley
Password for '<a href="https://mcharsley@github.com" target="_blank" rel="nofollow" onmousedown="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fmcharsley%40github.com\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNH1FRzpTQ48fQgxtmUwQR9dZwsgLg&#39;;return true;" onclick="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fmcharsley%40github.com\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNH1FRzpTQ48fQgxtmUwQR9dZwsgLg&#39;;return true;">https://mcharsley@...'
remote: Permission to SeleniumHQ/selenium.git denied to mcharsley.
fatal: unable to access '<a href="https://github.com/SeleniumHQ/selenium/" target="_blank" rel="nofollow" onmousedown="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNG2Qsi1AkMPKFtr9u5I-D6d6Po5YQ&#39;;return true;" onclick="this.href=&#39;https://www.google.com/url?q\x3dhttps%3A%2F%2Fgithub.com%2FSeleniumHQ%2Fselenium%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNG2Qsi1AkMPKFtr9u5I-D6d6Po5YQ&#39;;return true;">https://github.com/SeleniumHQ/selenium/': The requested URL returned error: 403

My account's 2-factor enabled, but I've set up a Personal Access Token with all the "Repo" scopes. Entering garbage rather than a PAT gives a different "Invalid username or password" error, so it's a Authz not an Authn error.

I'm a inexperienced with git, much less github, so it could easily be my being an idiot, but having said that
 - are the instructions up-to-date?
 - is the problem due to my cloning the wrong way?
 - is there some step I missed?
 - do I need to be permissioned somewhere (I'm not asking for a commit bit. Just the ability to upload a patch for review)
 - should I just give up and mail a patch file somewhere?

thanks

Mark

--
You received this message because you are subscribed to the Google Groups "Selenium Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/selenium-developers/a9604f47-579f-4922-a6ba-d59b2036bc20%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Loading...